VST-S4102
Wired 4-channel monitor system with a 7" HD quad-view touchscreen for live views around the machine, day or night. For crews who need to see the blind zones but not record them.
The VisionSure VST-S4102 Wired 4CH Quad-View Monitor System is a backup camera system for heavy equipment that needs live views, not recording. Operators of trucks, loaders and farm machinery can’t see the ground beside and behind them from the seat. The VST-S4102 puts a 1080P WDR front camera and two IR night-vision cameras on a 7” HD touchscreen in the cab. Hard-wired cameras give a steady picture at a lower price than wireless.
The 7” HD touchscreen shows up to four camera inputs in single, split or quad view. The operator picks the layout that suits the job, such as one large rear view while reversing or all four views in a tight yard. The fourth input is free for an extra camera when the machine needs one.
Automatic display switching brings the right camera to the screen, and automatic image adjustment keeps the picture readable as the light changes. The operator can also change views by touchscreen or remote control. That keeps attention on the work instead of the monitor settings.
The monitor accepts 1080P and 720P HD cameras as well as PAL and NTSC analog cameras. That makes it fit a wide range of vehicle camera systems, including machines that already have analog cameras fitted.
The kit’s two IR night-vision cameras, a 150° VST-C8830 and a 130° VST-C8645, cover the sides and rear in low light. The VST-C3759 front camera uses 1080P WDR to keep the view readable when driving into low sun or out of heavy shadow.
The VST-S4102 shows live video only and does not record. Wired cameras need cable runs, but they give a steady signal. For recording, the VST-S4201 and VST-S4202 use the same cameras with a DVR monitor, and the VST-S4203 adds recording to a wireless kit.
| Specification | Description |
|---|---|
| Display & controls | 7" HD quad-view touchscreen monitor |
| Camera & image | 4 camera inputs |
| Camera formats | Camera formats: 1080P, 720P, PAL, NTSC |
| Camera & image | Single, split and quad view |
| Display & controls | Automatic display switching and image adjustment |
| Display & controls | Touchscreen and remote control |
| Recording | Live view only (no recording) |
| Connectivity | No HDMI/VGA output |
| Power | Wide-voltage power supply |
| Camera & image | IR night-vision side and rear cameras, 1080P WDR front camera (see Included components) |
Four camera inputs; the listed kit contains a WDR front camera and two IR cameras. A fourth input is available for expansion.
| Part Number | Component | Status |
|---|---|---|
| VST-M9052 | 7" HD Quad-View Touchscreen Monitor | Included |
| VST-C3759 | 1080P WDR Front Camera | Included |
| VST-C8830 | 150° HD IR Camera | Included |
| VST-C8645 | HD 1080P 130° IR Rear-View Camera | Included |
The VisionSure VST-C3759 1080P WDR Front Camera is a 1080P forward facing camera for trucks, buses and fleet vehicles. Driving into low sun, out of a tunnel or through heavy shadow makes a standard camera wash out or go dark. The VST-C3759 uses 105dB Wide Dynamic Range (WDR) to balance the bright and dark parts of the same scene, so the road ahead stays readable.
Clear forward footage day and night: A 1/2.9" progressive-scan CMOS sensor records full 1080P (1920 x 1080) at 25 or 30fps, with automatic exposure and white balance. It still gives a usable picture down to 0.1 Lux. That gives clear footage for incident review, driver coaching and settling disputes.
The forward view for AI warnings: Connected to a VisionSure AI mobile DVR such as the VST-S8401, the VST-C3759 provides the forward view used for ADAS functions such as forward collision warning. It records the road ahead whether or not the AI functions are switched on.
No drilling: The camera mounts inside the windshield with 3M VHB double-sided adhesive, so there is no drilling or change to the vehicle. The angle can be adjusted after mounting to set the right view for each windshield.
Built for the road: The VST-C3759 is rated to operate from -20°C to +70°C and to be stored from -30°C to +80°C, at up to 95% humidity. It runs on 10–32V DC.
Where it's used: The VST-C3759 is the forward camera in the VisionSure VST-S4201 quad-view DVR kit and the VST-S8401 8CH AI mobile DVR system. It suits buses, coaches, trucks and commercial fleet vehicles.
Explore ADAS, DMS and FCW. Features vary by model; a glossary link does not mean this system includes the function.
VST-S4201
Four-camera DVR system with a 9" quad-view monitor that records every camera in 1080P and tracks the machine by GPS. Built for dump trucks, loaders and cranes that need to see and record their blind zones.
VST-S4202
Backup camera monitor with a built-in DVR in one sealed 7" IP66 unit. Shows and records up to four cameras and works with most existing camera signals. For tractors, excavators, trucks and buses.
VST-S4203
Wireless 4-channel system with a 7" quad-view monitor that records every camera, with no cable to run through the chassis. For cranes, loaders, haulers, trailers and tractors.
Discuss the views, recording and detection functions your operation needs.
